315ton friction forging press updated to electric screw forging pressg,auto parts' hot die forging

Haloong forging press machine has the features as follows:1,precision

control,quick response;Haloong forging press machine can set the

pressure in advance,every process can be made repeatedly and

precisely,which encure the products to be homogenized.Haloong forging

press drove by the servo motor,which can response quickly.
2,Reasonable structure,homogenized products:The forging press machine

has reasonable design of structure,no need to worry about the overload

caused by oversize or uneven heating.
3,Quick forming,extend die's lifetime:The speed of slide block will be

very quick when it nears to the bottom dead point,so the time is very

short to forming the material,and the forged parts can be completed

before it becomes cool.
4,Simple structure,cheaper maintenance:The servo motor is direct drive

has simple structure and less components,so its maintenance cost is

very cheap.
5,Process controlled as planned,wide application range:According to the

set pressure energy,the forging press can make slide fall down

acceleratedly first,then slow down the slide block,and press the forged

parts with set energy.The forging press with bigger tons can forge

small forgings,one stroke time is little change.The bigger forging

press can be used to instead of smaller forging press,and the bigger

one can yield twice the result than that of smaller ones.
6,High efficiency,reduce the production cost:The servo motor runs only

at forming process,but the friction motor need run

continuously.Compared with friction press,the servo forging press

machine can save 55% energy.
7,Stamp forming,high energy.
8,Lower noise and vibration:Compare with impact hammer,the pressure of

servo forging press produces inside of the frame,there is no excessive

vibration to the ground,so the cost of foundation is cheaper.The noise

and vibration of servo press are far less than those of ompact hammer.
9,High automation,unmanned production :The automatic production line is

available,and the whole automatic process do not need the skilled

workers.
web:www.cncforgingpress.com
email:haloong@haloong.com
whatsapp:+8618530012598

forging press,forging press machine,hot die forging,clod die forging,forging parts,forgings,